Do you do site & pad construction in Snyder, TX?

Yes. Snyder is roughly 85 miles northeast of our Midland yard, and site & pad construction is work we run regularly across Scurry County. US-84 and US-180 are the main routes, with county roads and lease roads past them.

Scurry County • 85 mi from Midland

Site & Pad Construction in Snyder, TX

Site prep and pad construction that gets the ground ready to build.

Site & Pad Construction is one of the most-requested services Rangefinder Excavation provides around Snyder, TX. The mix of oilfield and ranching activity around Snyder keeps our crews working across nearly every service we offer, from pad construction to pond building.

Before a slab gets poured or a building goes up, the ground has to be right — graded to spec, compacted to bear the load, and draining the way the engineer designed it. Rangefinder Excavation handles site and pad construction across the Permian Basin, from commercial building pads to oilfield well pad construction.

More on Site & Pad Construction→More on Snyder, TX →

Aerial view of a large graded and compacted commercial building pad along a Permian Basin highway frontage

What's Included

Site clearing and rough grading to plan
Building pad excavation and compaction
Well pad construction and access road grading
Commercial lot grading and drainage shaping
Cut-and-fill balancing to minimize haul-off costs
Final grade shot and documented for your engineer's sign-off

Why Snyder Property Owners Call Us

A pad built on properly compacted base carries loaded rigs and haul trucks without rutting or pumping
Grade shot to your plan tolerances, so the slab or the location sits where the engineer drew it
Fall built in from the start, so the first heavy rain runs off the pad instead of sitting on it
Cut-and-fill balanced on site where the ground allows it, which is the difference between hauling material in and moving it across

Ground conditions — Snyder, TX

Scurry County mixes caliche, rock and red clay across rolling ground — the kind of tract where the dig changes twice between the gate and the build site.

Rolling terrain sheds water into draws, which is good for the pad and hard on any crossing that was not sized for it.

What site & pad construction looks like around Snyder

Snyder is roughly 85 miles northeast of our Midland yard. US-84 and US-180 are the main routes, with county roads and lease roads past them.

Work we get called for in Scurry County

Stock ponds and tanks built into the draws
Ranch and lease roads over rock and caliche
Pad construction tied to oilfield activity

Access & permits

TxDOT's Abilene district covers state-highway frontage; Scurry County Road & Bridge handles county road access.

How a site & pad construction job runs

Same four steps whether the job is in Snyder or anywhere else we work: review plans and stake the site, clear and rough grade, compact to spec, final grade and drainage.

See what each step involves →

Site & Pad Construction in Snyder — Common Questions

Do you do site & pad construction in Snyder, TX?: Yes. Snyder is roughly 85 miles northeast of our Midland yard, and site & pad construction is work we run regularly across Scurry County. US-84 and US-180 are the main routes, with county roads and lease roads past them.
What affects a site & pad construction job around Snyder?: Scurry County mixes caliche, rock and red clay across rolling ground — the kind of tract where the dig changes twice between the gate and the build site. Rolling terrain sheds water into draws, which is good for the pad and hard on any crossing that was not sized for it.
Do I need a permit for site & pad construction near Snyder?: It depends on whether the work touches a public road. TxDOT's Abilene district covers state-highway frontage; Scurry County Road & Bridge handles county road access. We will tell you which one applies before we price it.

More general questions about site & pad construction are answered on the site & pad construction page.